Here are the six best ways to convert a mesh to a wireframe in Blender. Only one question remains: what will you end up doing with them?

How to Convert a Mesh to a Wireframe in Blender

They are several Blender workflows that bend toward a wireframe type of effect, carried out through the base mesh of your choosing.

We’re not talking about the Wireframe overlay toggle, either—you can access this display option in the top-right corner of the viewport, however, or through the viewport display pie menu with the Z key. Shift + Z will also toggle the Wireframe display on and off.

1. Use the Wireframe Tool

The Wireframe tool in Blender is a degenerative modifier that reduces your object to a network of “pipes” encasing every edge in the mesh. You can find it in Edit Mode under the Face dropdown.

It’s the most straightforward way to create a wireframe in Blender. There are a few ways to make every Wireframe operation your own in the Adjust Last Operation panel—you can Offset the new mesh, Replace the old one, change its Thickness, and even use a couple of toggles to ensure a uniform gauge throughout the new model.

We recommend using the Wireframe tool for general cases and simple primitives. For a more fine-tuned sense of finesse, the Wireframe modifier might be what you’re looking for.

2. Use the Wireframe Modifier

The Wireframe modifier takes every edge in a mesh and transforms each one into a four-sided polygon, all of which are then welded together to form a new mesh. Unlike the Wireframe operator, modifiers are non-destructive until the moment you apply them; you can even adjust them by switching up the order that each modifier is applied within the modifier stack.

To use the Wireframe modifier:

Select the object that you would like to turn into a wireframe. In the Modifiers tab under Properties, select Wireframe from the Modifiers dropdown. Adjust your settings until you’ve got what you want in front of you. Lock it in by tabbing back to Object Mode and selecting Apply.

In the Wireframe modifier’s settings, you’ve got many of the same options as before, as well as a couple of extra provisions that you may find useful:

Thickness, the width of each arm of the wireframe. Offset, which you can use to dial in your wireframe’s placement relative to the original geometry. Boundary, which you can use to manage the eventual mesh’s UV island boundaries. Replace Original, allowing you to retain the original mesh underneath the new wireframe mesh. Thickness, the protocol by which the gauge of the wireframe “piping” is determined around things like sharp corners; Relative determines the thickness of each wireframe arm by the length of the span itself. Crease Edges, which irons in distinct edges in anticipation of a Subdivision Surface modifier on top of this effect. Material Offset, which coordinates the original material index with the new geometry of the wireframe, offsetting it accordingly. Vertex Group, conferring an extra degree of control over the wireframe piping now caked around each edge—vertices of lower weight will end up with thinner wireframes between them.

This approach is only applicable if your mesh actually has faces, however. If you want to create a wireframe out of something like a Grease Pencil object or a NURBS curve, you might need to try something else instead.

3. Use the Skin Modifier

Dimensionless lines and curves require a bit of time and care, especially if you’re after a clean mesh with little hassle afterward. Before you can use the Skin modifier on a NURBS curve or a Grease Pencil object, you’ll need to convert it to a mesh first.

To do so, tab into Object Mode and right-click with your curve or Grease Pencil layer selected. Hover over Convert, and you should see a Mesh option; select it and tab back into Edit Mode.

Now, you’re free to apply any modifier that you want, including the Skin modifier. This will encase your curved mesh in a solid mesh that you can work with just like any other type of ordinary geometry. Construct any shape you want with NURBS or with the Grease Pencil, and volumize it once everything has been nudged into place.

If your “wireframe” is simply the skeleton of the intended subject and just needs dimensional geometry over top of it to work with, the Skin modifier should be able to get the job done. You might run into a few hiccups if your model is complicated in some areas, but if this is your method of choice, you’ll be able to find your way around the obstacle after a careful once-over in Edit Mode.

You can also use the curve’s Bevel slider in the Properties panel to give dimension to a curve.

4. Use Geometry Nodes

There are several Geometry Node workflows that will result in the wireframe mesh of your dreams—the Mesh to Curve Node eliminates every face making up your mesh, leaving only edges and vertices behind.

Nothing is decimated or simplified; instead, you’re left with your object in its raw form:

In the Geometry Nodes workspace, create a new Node Tree. Add two linear Geometry Nodes: a Mesh to Curve Node, followed by a Curve to Mesh Node, all between your Group Input and Output Nodes. Apply the effect in the Modifiers panel, or continue to explore this effect as it relates to other live Nodes within the tree.

Without this second Node, applying this effect outright would result in your mesh completely disappearing. Nodes may seem tricky at first, but one solution to many common issues is always ensuring that your intended geometry has a destination to land in. In some cases, this will simply be the Group Output. If that doesn’t suffice, you might need an additional Node, like the one we’ve used here.

5. Use Texture Nodes

Contrary to popular belief, the Wireframe Node is actually a Texture Node, not a Geometry Node. The Wireframe Node in Blender analyzes your mesh through the Cycles processor, triangulating your topology and extracting it as a new set of edges, which are then simplified into a new texture shader over top.

To use the Wireframe Node, click into the Shading workspace and create a new material in the Nodes panel.

Use the Add dropdown to create two new Nodes: a Wireframe Node, and a Mix Shader Node. Connect your BSDF output to one of the Shader inputs in the Mix Shader. Link the Factor output of the Wireframe Node up with the Factor input of the Mix Shader. Use the Mix Shader’s lone Shader output to connect the entire scheme to your Material Output Node to the right.

It’s not exactly a wireframe you can grab; in fact, it’s totally invisible outside the Material Preview overlay and the Render Preview overlay. It is, however, one unique way to stylize a model and to create a variety of interesting wireframe-inspired effects and designs.

6. Make the Wireframe From Scratch

What if none of the above gets you by? You can always author the body of the wireframe totally from scratch. The way of the warrior isn’t always a glamorous one, but it’s an approach that will guarantee you exactly what you want.

To skip the automation and rough it out with the best of them, you can begin by breaking down any geometric primitive, or even just by starting out with basic geometry, right off the bat.

Creating Wireframes in Blender: Tronify Your Latest and Greatest

Wireframes in Blender shouldn’t be limited to your viewport display settings. Give your audience the cyber-kinetic thrill of a lifetime with any of these Blender workflows for wireframe meshes.

There are so many cool ways to use a wireframe mesh. Whether you love low-poly work or are interested in creating something more terrifying and demonic, wireframes in Blender are the perfect way to immerse the viewer in a digital world of your design.